Care List for Fabius GS premium Components

The following table lists Fabius GS premium components with recommended processing methods. Processing refers to cleaning, disinfection, and/or sterilization, as appropriate for a given component.

The table is intended as a guide. Follow the institution’s policies regarding specific methods and agents for cleaning and sterilization. The parts should be cleaned and disinfected by machine. If not, they must be disinfected by immersion and then cleaned.

1) Only use neutral cleaning agents (e.g. Neodisher Medizym)! Do not use disinfectants, risk of corrosion!

2) Use disinfectants based on aldehydes and quaternary ammonium compounds.

Testing was performed with Incidin Extra N and Incidur (wiping), and Gigasept FF and Korsolex Extra (disinfection by immersion).

3) Do not use any alcohol-containing agents.

4) Remove any water collecting in the ventilator diaphragm.

Larger quantities of condensed water can impair device operation or lead to device failure!

5) Only with completely demineralized water

6) After washing, sterilization is necessary to dry out the breathing system. Insufficient drying of the control spaces located in the breathing system can lead to impairment of device function or to device failure!

7) Disinfect flow sensor for about 1 hour in a 70 % ethanol or isopropanol solution. Then leave it out to dry in air for at least 30 minutes.

Observe its own Instructions for Use.